Jarred Week 4

This Week I removed the axel that moves the wheels of the car by using special sockets and removed all 6 bolts that were fasten to the thing in place.

Then I brought the axel to the sink used for removing all the old grease so that new grease could be added to it to improve the function of the joint.


Halfway through the ends of the axel fell apart into it's components of ball bearings and a circular metal piece that was holding it all together. This was fine though as it made cleaning with the cleaning fluid and brush easier to do.

After that I labeled what end goes where and finally air blowed all parts to make sure that there was no fluid to speak of as having water or other fluids on the part would cause problems with the greasing part.